User's Manual Part 1

NOTICE/Compliance Information Statement

For your safe and efficient use of the transceiver, please read the following

safety information.

1.The maintenance work can be carried out only by professional and technical

personnel, please do not disassemble or reassemble by yourself.

2.Can use only the specified battery and charger, rechargeable 5 to 40

℃

range.

3.To avoid electromagnetic interference and other problems caused by

electromagnetic incompatibility, please close the transceiver in the place where

there is a sign showing "No transceiver", as

well as on the plane where transceivers are required to be shut down by crew.

4.In the car with an airbag, do not put the transceiver within the reach of expansion

of the airbag.

5.When entering into a flammable and explosive environment, please close the

transceiver.

6.You should not get close to blasting areas and areas where deployed some

detonators until the transceiver is turned off.

7.Do not use the transceiver with a damaged antenna, for the damaged antenna

may cause light burn of your skin.

8.Do not expose transceivers under direct sunlight for a long time, or place it near

some heating equipment.

Safety Training Information

Your FRS radio generates RF electromagnetic energy during transmitmode. This

radio is intended for use by “General Population” in uncontrolled environment.

This radio has been tested and complies with the FCC RF exposurelimits for

“General population.” In addition, your ALINCO radio complieswith the following