User's Manual

33
8
Maintenance and Reference
8.2 Resetting
When you reset the transceiver, all settings are returned to the
initial (default) factory setting. You can reset programmed
channel memory when the write protect is off.
1. Press and hold the key and press the key
to turn the power on.
2. Release the keys when all icons are displayed.
The transceiver returns to the initial VFO mode.
Factory Setting
VFO Frequency VHF :145.000MHz
UHF :445.000MHz (T version)
UHF :433.000MHz (E version)
FM Radio :88.100MHz (T version)
FM Radio :87.500MHz (E version)
Air :118.000MHz (T version)
L-UHF :380.000MHz (T version)
Memory Channel 0 - 199ch blank
Audio Volume 10
Squelch Level 3
Battery Save ON
Scan Resume Condition Busy Scan
Beep ON
Tuning Step Auto
Shift OFF
Shift Range VHF :0.6MHz
UHF :5.0MHz
Tone Squelch OFF
Tone Frequency 88.5Hz
APO, BELL OFF
8.3 Options
EME-24 Earphone microphone
EMS-60 Speaker microphone
EDH-32 Cigarette lighter cable
ESC-38 Soft case
EME-18 Earphone
EBP-58N Li-ion battery pack (DC3.7V 600mAh)
EDC-126 AC adaptor for charge the battery pack