User's Manual

Parameter Setting Mode

(9) Memory Write Protect function

This function prevents from overwriting or deleting memory

channels by mistake and protects what you've programmed.

You can always program frequencies to blank channels

regardless of this setting.

1. " " is displayed on the LCD.

2. Rotate the dial to switch ON/OFF of Memory Write

Protect function as follows.

Caution

Note that when you reset all settings (see on P.XX) with the

state of "oFFProtCt", which means allowing to overwrite,

ALL memory channels you programmed are deleted.

The factory-shipped default is set as "onProtCt" which

means preventing from overwriting.

(10) Scan Type

You can select a scan-resume condition between Busy scan

and Timer scan.

1. " " is displayed on the LCD.

2. Rotate the dial to switch a scan-resume condition as

follows.

(11) AM / FM

You can select a modulation mode between AM and FM.

It is necessary to switch a display for setting a tuning step in a

specified band in advance. For more information on this, please

refer to "Entry Completion Digit for Different Tuning Steps" on

P.XX.

1. " " is displayed on the LCD.

2. Rotate the dial to switch a scan-resume condition

between AM and FM.

Tip

When you set a tuning step as "Auto", you are not able to

switch a modulation mode. In the case, you will see "------"

displayed on the LCD.

"bUSY" -> "timEr"

"onProtCt" -> "oFFProtCt"