User's Manual
25
6
Parameter Setting Mode
(5) APO (Auto Power Off)
This function automatically turns the power OFF if there is no
key operation for a specified period of time to prevent battery
charge wastage.
This is useful if you easily forget to turn off the transceiver.
1. " " is displayed on the LCD.
2. Rotate the dial to select a setting value as follows.
Just before cutting the power OFF, a beep will be heard. Select
the time from 30, 60, 90 minutes, and OFF. When OFF is
selected, this function does not work.
To turn the power ON, press the POWER (PWR) key again.
Tip
With this function ON, even if the DJ-C7 receives signals, it
won't put off the turn-off period. Only key operations will
expand the period.
(6) Battery Save function
This function prevents battery charge wastage by switching the
reception circuit power supply OFF.
With this function ON, the transceiver will be a hibernation state
if there is no key operation or received signals for a continuous
period of 5 seconds.
1. " " is displayed on the LCD.
2. Rotate the dial to switch ON/OFF of Battery Save
function.
When you set ON, " " will appear on the LCD.
• The factory-shipped default is set as ON.
• This function will be released temporarily when the DJ-C7
receives signals or there is a key operation.
• This function will not be performed while the DJ-C7 is under
scanning.
• LCD displays even with the hibernation state.
(7) BEEP Sound
This function sounds a beep during operations. When you feel it
noisy or annoyed, you may turn off its sound.
1. " " is displayed on the LCD.
2. Rotate the dial to switch ON/OFF of BEEP Sound as
follows.
(8) BELL
It functions like a beeper. The DJ-C7 tells you with a bell sound
that another station calls up.
1. " " is displayed on the LCD.
2. Rotate the dial to switch ON/OFF of the bell function.
When you set ON, " " will appear on the LCD.
When the DJ-C7 receives signals, " " will blink on the LCD
and a bell sounds.
To release the bell sound, press the PTT key.
"oFF BEEP" -> "on BEEP"
"OFF" -> "30" -> "60" -> "90"