User's Manual

17
4
Basic Operations
■Clearing a Memory Channel
1. Set Memory Write Protect function to "OFF" state, if
necessary.
For more information on this function, please refer to "Memory
Write Protect function" on P.XX.
2. Press the key to switch to the Memory mode.
3. Rotete the dial to select the memory channel number
you want to delete.
4. Press the key, and press the key while the
F icon appears on the LCD.
A beep sounds telling that the frequency is deleted
successfully, and "------" is displayed on the LCD.
5. With "------" displayed on the LCD, rotate the dial to
return to the Memory mode.
Press the key to return to the VFO mode.
When nothing is written as a memory channel, press the
key to return to the VFO mode.
Tip
Right after deleting the memory channel with "------"
displayed on the LCD, you can resume what you erased.
To restore the channel, press the key and press the
key again while the F icon appears on the LCD.
Note that you won't be able to restore it once you change
the operating mode.
■Contents of Memory Channel
The following settings can be stored in each memory channel.
• Frequency
• Shift frequency
• Shift direction (+/-) and Split setting
• Tone encoder frequency
• Tone decoder frequency
• Tone encoder/decoder setting
• Radio wave type (AM/FM)