User's Manual

ManualsBrandsAlinco Incorporated, Electronics Division ManualsElectronicsVHF/UHF FM Mobile Transceiver

Basic Operations

4.5 VFO Mode

This is a mode which is set as the factory-shipped

configuration.

Radio frequencies and various settings can be changed by

rotating the dial in this mode.

■Switching the Band

Everytime you press the BAND key, below 7 bands can be

switched in order.

■1 MHz UP/DOWN

When you rotate the dial with holding the key down, you

can increase or decrease a frequency by a 1MHz-step in

accordance with the direction of dial rotation.

This function is a quick way to increase or decrease the

frequency by a large amount.

After pressing the key, releasing it without any dial

operations can switch among bands.

■Entry Completion Digit for Different Tuning Steps

Tuning step frequency can be changed. You may choose one

of the unit selections as follows;

Auto, 5, 6.25, 8.33, 10, 12.5, 15, 20, 25, 30, 50, 100, 125, 200 kHz.

1. Press the key to select the band to be changed

its tuning step.

2. Press the key, and press the MONI key when you

see the F icon appears on the LED.

3. Rotate the dial to choose a tuning step frequency

mentioned above.

4. Press the PTT key to complete the setting and to

return to the frequency display.

The default tuning step is set as "Auto".

Choosing a tuning step but "Auto" in any of the bands releases

the default setting as "Auto" in all provided band selections.

And the last selection of the tuning step for a specified band is

programmed.

Returning the setting as "Auto" in a specified band, all tuning

steps for all provided bands will be returned as "Auto".

"Auto" uses tuning steps and modes which are both

programmed to the DJ-C7 in advance.

Default

VHF

L-UHF

H-UHF

AM Radio

Short Wave

FM Radio

Air

145.000(142.000~169.995MHz)

380.000(380.000~429.995MHz)

433.000(430.000~469.995MHz)

.531(531~1620kHz)

1.625(1.625~9.995MHz)

76.100(76.100~89.995MHz)

118.000(108.000~141.995MHz)

WFM

AM/FM