User's Manual
BASIC OPERATIONS
Receiving
NOTE: If your transceiver has set higher squelch level or being programmed with signaling features, it
may fail to hear the calling.
Transmitting
Press and release the [PF2] key to monitor for a while to conrm the channel desired is not busy.
Press and hold [PTT] key to speak into microphone (MIC). Keep the distance of about 2.5~5cm
between your lips and MIC, and speak at normal voice level.
When the channel you are operating is called, LED GREEN lights, then you hear the voice from
transmitting party.
NOTE: Press [PTT] key, red is lit indicating it is transmitting. Release PTT to receive.