User's Manual

GETTING ACQUAINTED
Indicator Status and Beep
Low battery voltage warning
Transceiver emits a low voltage beep at intervals of 60 seconds,
and red light blinks.
TX/Reading data Red is lit while transmitting or reading the data while programming.
RX/Writing data Green is lit whilereceiving or writing the data while programming.
Scan Green blinks every second while scanning.
DTMF Successfully Decoded Green and red alternatively blinks.
Key Operation
A beep sounds when activating a function. Beeps twice when
exiting from a function.
[PF1] & [PF2] Key Default
Press [PF1] Battery Capacity Enquiry
Press [PF2] Squelch off
Press and hold [PF1] Whisper
Press and hold [PF2] TX Power Switch