User's Manual

Professional
FM Transceiver
47
BACKGROUND OPERATIONS
VOX Beep
After enabling this function, beginning transmitting by VOX, the transceiver will voice beeping.
1.Press and hold
【
PF2
】
key while turning on the radio, and keep pressing
【
PF2
】
key for 3 seconds to enter into the Set Mode operations.
2.Press
【
B
】
/
【
C
】
key to choose the Menu 5 and display “
VOXTON
”.
3.Press
【
A
】
key then press
【
B
】
key or
【
C
】
key to choose the parameter.
ON:
VOX beeping is enabled.
OFF:
VOX beeping is disabled. Default setting is OFF
Frequency Step Size Setup
Tuning step can't be changed in the Channel modes but usable only in VFO
mode.
Frequency input and frequency scan are both affected by tuning step setting.
1.Press and hold
【
PF2
】
key while turning on the radio, and keep pressing
【
PF2
】
key for 3 seconds to enter into the Set Mode operations.
2.Press
【
B
】
/
【
C
】
key to choose the Menu 6 and display “
STEP
”.
3.Press
【
A
】
key then press
【
B
】
key or
【
C
】
key to choose the parameter.
Available steps are 5 / 6.25 / 10 / 12.5 / 15 / 20 / 25 /30 / 50KHz.
Default is 5KHz