User's Manual

Professional
FM Transceiver
30
NOTE:
Frequency scan checks all bands allocated to the VFO. When channel scanning, the skipped channel is
excluded from the scanning. While scanning, change the direction upward/downward by pressing
【
B
】
key or
【
C
】
key. When a signal is being received, the scan stops for 15 seconds and resume scanning.
SHORTCUT OPERATIONS
Priority Scan
In channel mode, after pressing
【
A
】
key, while
icon is displayed on the top
left corner, press
【
7
】
key to activate the priority scan. In priority scan state, it
monitors priority channel once every 10 channel scanning. When the priority
channel receives a matching signaling, transceiver will stay tuned to the priority
channel until current signal disappear.
NOTE: To activate this feature, it is required to set and select the priority channel.
In VFO mode, priority scanning is unavailable
Channel Scan Skip
In Channel+Name Tag mode or Frequency+Channel mode, after pressing
【
A
】
key, while
and then
press
【
6
】
icon is displayed on the top left corner, press
【
6
】
key to set the current channel to be
skipped while channel-scanning, and ‘S’ icon appears to indicate the channel is set as the skip. Repeat
the operations to cancel channel scan skip setting.
NOTE: This feature is available only in the Channel modes.