User's Manual

41
SET MODE OPERATIONS
Display Mode
This parameter determines the LCD display mode. This parameter may not be available for dealer-
programmed radios.
1.Pressing and holding [PF2] key to turn on the radio to enter the Set mode.
2.Press
/ key to choose menu 01 and display "DSP".
3.Turn the main dial to select the desired parameter.
FREQ: channel frequency + channel number display
CH: channel number display.
NAME: Channel name+ Channel number display
4.Press
key or key to conrm and exit.
RESET
In case the radio is malfunctioning or you may resume the default conditions of the
radio, please perform this factory reset.
1.Pressing and holding [PF2] key to turn on the radio to enter the Set mode.
2.Press
/ key to choose menu 02 and display "RESTOR".
3.Turn the main dial to select the desired parameter.
FACT: Restore factory default
INIT: Restore custom parameters only to default leaving the memory
OFF: Do not perform reset