User's Manual
40
FUNCTION MENU SETUP
Scan Dwell Time Setup
There are three kinds of scan dwell time for optional.
1. Press
key, the top left corner of LCD displays " " icon, then press key enter into function menu.
2. Press
/ key to choose NO. 24 function item, it shows “SCAN” on LCD.
3. Rotate channel switch to choose desired setup.
5ST: When scanning matched signal, transceiver will stop scaning for 5seconds
then resume.
10ST: When scanning matched signal, transceiver will stop scaning for 10seconds then resume.
15ST: When scanning matched signal, transceiver will stop scaning for 15seconds then resume.
2SP: When scanning matched signal, transceiver will stop scaning, 2seconds after signal disappeared,
then resume.
4. Press
key or key to conrm and exit.
Function Icon Stay Time Setup
1. Press key, the top left corner of LCD displays “ ” icon, then press key enter into function
menu.
2. Press
/ key to choose NO. 25 function item, it shows “FTIME” on LCD.
3. Rotate channel switch to choose desired setup.
FUNCT: When nished function setting or enter into function menu, icon disappeared.
1SEC: When nished function setting or enter into function menu, icon stay 1second
then disappeared