User's Manual
32
Wide / Narrow Band Selection
According to the national conditions of various countries, it can be set for communication by wide band or
narrow band.
1. Press key, the top left corner of LCD displays “ ” icon, then press key
enter into function menu.
2. Press
/ key to choose NO. 08 function item, it shows “W/N” on LCD.
3. Rotate channel switch to choose desired setup.
12.5K: Narrow band
4. Press
key or key to conrm and exit.
FUNCTION MENU SETUP
NOTE: This function item will hide automatically when main band and sub main band are under channel mode.
Frequency Reverse
1. Press key, the top left corner of LCD displays“ ” icon, then press key enter into function menu.
2. Press
/ key to choose NO. 09 function item, it shows “REV” on LCD.
3. Rotate channel switch to choose desired setup.
ON: Turn on Frequency reverse function, TX and RX frequency of current channel will
be interchanged. If CTCSS/DCS signaling is set, it also will be interchanged.
OFF: Close Frequency reverse function.
4. Press
key or key to conrm and exit.