User's Manual

24
SHORTCUT OPERATIONS
1. LCD displayed “
S
” means the current channel will not be scanned.
2. “
S
” icon disappeared means the current channel will be scanned.
Frequency Reverse
Under standby state, press key, the top left corner of LCD displays “ ” icon, then press to set
the current channel to Reverse function, Repeat the operations to cancel channel Reverse function.
1. When LCD displays “R” icon, it means current arrow directed channel open the
frequency reverse function, the TX frequency and RX frequency is interchanged, if
CTCSS/DCS signaling is set, it will also interchange.
2. When “R” icon disappears, it means reverse function is close.
Stopwatch function
1. Under standby state, press
key, the top left corner of LCD displays “
” icon,
then press
to enter into stopwatch function.
2. Press
key to start timing. Under this state, press key to pause timing.
When timing is pause, press
key to continue timing.