User's Manual

23
SHORTCUT OPERATIONS
Frequency/Channel Scan
Under corresponding mode, press key, the top left corner of LCD displays “ ” icon, then press
key to start frequency scan or channel scan.
Under VFO mode, frequency scan is available. This function is used for monitoring
signal of various communication frequency by transceiver ‘step’ setup, press numeric
key or
key to exit.
Channel Scan
Under channel mode, this function is used for monitoring signal of each channel in
this mode. Press numeric key or
key to exit.
▼
▼
▼
NOTE:
Frequency scan is of all bands scan, it scans upwards as your STEPPING setting.
In channel scan, the skipped channel is not in the line of scanning. Scan upwards as per channel no.
(please refer to channel scan skip).
Frequency/channel scan can change scan direction by rotating channel switch, when find a matching carrier
wave and signaling, the transceiver will stay 5 seconds then go on scanning. (Please refer to scan setup)
Channel Scan Skip
Under corresponding mode, press key, the top left corner of LCD displays “ ” icon,
then press Key, to set the current channel to be skipped while channel-scanning,
Repeat the operations to cancel channel scan skip setting.