User's Manual

BASIC OPERATIONS

FM Channel Searching

When transceiver in FM radio mode, press key, LCD displays FUNC icon, then

press to start FM searching. When one station is sought, LCD displays current

station frequency, you can listen to current station.

Squelch Off Momentary / Squelch Off

Side key [PF2] can be setup for Squelch off Momentary or Squelch off function by programming software.

1.Squelch off: Press [PF2] key, squelch circuit is not mute, back-ground noise can be heard. Press [PF2]

key again, squelch circuit is mute.

2.Squelch off Momentary: Press and hold [PF2] key, squelch circuit is not mute, back-ground noise can be

heard. Release [PF2] key, squelch circuit is mute.

NOTE: The above functions are only available after [PF2] key setup in programming software.

Receiving

When your transceiver is called, the LED lights will light up, the main channel receives display a green, (Sub-

channel receives display blue and the TDR Mark will ash following), and you can hear the received call.

NOTE: You may not receive the calling when your transceiver is set at high squelch level. If current channel

is programmed with decode signal, only the same signaling call can be heard.