User's Manual

BASIC OPERATIONS

Frequency Input by Keypad

Under frequency mode or FM radio frequency mode, you can directly enter frequency through keypad.

1. When your transceiver is under Channel mode, press key to switch into VFO.

Channel Input by Keypad

Under channel mode of transceiver or FM radio, you can switch to desired channel by

entering three numbers (001-199). If the entered channel is not in edited channel range,

the transceiver will emit beep to prompt wrong input and return to current channel. For

example, entering 001 is channel 1, 030 is channel 30, 125 is channel 125.

NOTE: The frequency input of main channel or FM radio is relevant to the stepping and transceiver

frequency range. If frequency setup is beyond range or not matching with step size, the input is unavailable.

Under the FM radio mode, the frequency step size input by numeric keys is 100k.

2.Enter the desired frequency by keypad.

NOTE：When your transceiver is under Channel mode, the display will show the

channel number in the lower right corner.