User's Manual

INSTALLATION & CONNECTION

Installing / Removing the Antenna

■ Installing the Antenna:

Screw the antenna into the connector on the top of the

transceiver by holding the antenna base and turning it

clockwise until secure.

■ Removing the Antenna:

Turn the antenna anticlockwise to remove it.

Installing / Removing the Belt Clip

■ Installing the Belt Clip:

Place the belt clip to the corresponding grooves on the

back of the transceiver, and then Clockwise screw it.

■ Removing the Belt Clip:

Anticlockwise turn screws to remove the belt clip.