User's Manual

Professional
FM Transceiver
42
This parameter determines the resume conditions of scanning.
1.Pressing and holding [PF2] key to turn on the radio to enter the Set mode.
2.Press
/ key to choose menu 08. LCD will display "SCAN".
3.Turn the main dial to select the desired parameter.
-5ST: Resumes scanning after 5 seconds regardless of receiving state
-10ST: Resumes scanning after 10 seconds regardless of receiving state
-15ST: Resumes scanning after 10 seconds regardless of receiving state
-2SP (Busy scan): Resumes scanning after 2 seconds from the receiving signal is gone
4.Press
key or key to conrm and exit.
Scan Resume Conditions
SET MODE OPERATIONS