User`s manual
6. Select the strip size. Options are 16KB, 32KB and 64KB. The last one is
recommended.
7. Select way in which RAID will be created.
There are different methods for creating a RAID0 and RAID1 with the Adaptec
Controller. The following table will explain each method:
RAID Create RAID via When to use
RAID0 No Init Create RAID 0 on new drives
RAID0 Migrate Create RAID0 from one blank drive and one
with information that will be kept
RAID1 Build Create RAID1 with one blank drive and one
with information that will be kept
RAID1 Clear Create RAID1 with blank drives or with used
but with information that will be deleted
RAID1 Quick Init Create RAID1 with new drives, fastest
method
57