User`s manual

2. Unplug the power cable on the back of the computer

3. Remove the CMOS battery

4. Move CMOS jumper so that it covers pins 2 and 3 (see image below) and

leave it there for 5 seconds

5. Move the CMOS jumper back to pins 1 and 2 (see image below)

6. Put the CMOS battery back in its socket

7. Plug power cable to the computer

8. Boot up and press DEL to enter setup

BIOS protection jumper [JP16]

This jumper protects the BIOS memory from being overwritten. It is a safety mechanism

to avoid accidental or malicious BIOS flashing. If the jumper is positioned so that it

covers pins 2 and 3, the BIOS will not allow any flash utilities to overwrite it. If the BIOS

needs flashing, the pins must be covering pins 1 and 2 (see image below).