User Manual

Setting up the monitor | 29

2. Connect

the other end of the USB 3.0 upstream cable to an appropriate

USB 3.0 port on your computer.

3. Conne

ct the USB 3.0 peripherals to the USB 3.0 downstream ports on the

monitor.

4. Pl

ug the power cables for your computer and monitor into a wall outlet.

5. Tur

n on the monitor and the computer.

If your monitor displays an image, installation is complete. If it does not

splay an image, see Universal Serial Bus (USB) specific problems.

Removing the monitor stand

NOTE: To prevent scratches on the display when removing the stand,

ensure that the monitor is placed on a soft, clean surface.

NOTE: The following instructions are applicable only for attaching the

stand that was shipped with your monitor. If you are attaching a stand

that you purchased from any other source, follow the set up instructions

that were included with the stand.

To remove the stand:

1. Turn off the monitor.

2. D

isconnect the cables from the computer.

3. Pl

ace the monitor on a soft cloth or cushion.

4. C

arefully slide and remove the I/O cover from the monitor.