User Manual

18 | About your monitor
Power management modes
If you have a VESA DPM™ compliant display
card or software installed on your
computer, the monitor can automatically reduce its power consumption when
not in use. This is referred to as Power save mode*. If the computer detects input
from the keyboard, mouse, or other input devices, the monitor automatically
resumes to function. The following table shows the power consumption and
signaling of this automatic power saving feature:
VESA
modes
Horizontal
sync
Vertical
sync
Video Power
indi
cator
Power
consumption
Normal
op
eration
Active Active Active Blue 73 W (maximum)**
29 W (typical)
Active-off
mode
Inactive Inactive Blanked White
(bli
nking)
Less than 0.3 W
Switch off - - - Off Less than 0.3 W
Power Consumption P
on
20.78 W
Total Energy Consumption (TEC) 65.59 kWh
* Zero power consumption in OFF mode can only be
achieved by disconnecting
the main cable from the monitor.
** Maximum power consumption with max
luminance, and USB active.
This document is informational only and refl
ects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
NOTE:
P
on
: Power consumption of On mode measured with reference to
Energy Star test method.
TEC: Total energy consumption in kW
h measured with reference to
Energy Star test method.