User Manual

Setting up the monitor | 29
Connecting the computer
WARNING: Before you begin any of the procedures in this section,
follow the Safety instructions.
NOTE: Do not connect all cables to the computer at
the same time.
NOTE: The images are for the purpose of illustration only. Appearance of
the computer may vary.
To connect your monitor to the computer:
1. Connect the other end of the DisplayPort cable or HDMI cable to your
computer.
2. Connect
the other end of the USB 3.0 upstream cable to an appropriate
USB 3.0 port on your computer.
3. Conne
ct the USB 3.0 peripherals to the USB 3.0 downstream ports on the
monitor.
4. Pl
ug the power cables for your computer and monitor into a wall outlet.
5. Tur
n on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not
display an image, see Common problems.