Instruction manual

12.7 Restoring Default Settings

To restore default factory settings to your DVR:

1. Enter the Default Settings menu by clicking Menu > Maintenance > Default.

Select OK to restore factory defaults.

Note: Network information such as IP address, subnet mask and gateway will not be

restored.

12.8 Viewing System Information

To view system information:

1. Enter the Information menu by clicking Menu > Maintenance > Information.

• Device Information: The model number of the DVR, serial No., the current

firmware version installed on DVR, etc.

• Chan Status: Camera working status in DVR such as motion, tampering, video

loss and video exception.

• Record Status: Recording status of the cameras, including: stream type, frame

rate, bit rate, resolution, record type, etc.

• Alarm Status: The status of external alarm in/out on DVR .

Intelligent Security and Fire Ltd