Instruction manual

3. Select the Local Upgrade tab.

4. Select the firmware on the USB device.

5. Select Upgrade to begin the update process.

6. After the system firmware has been updated, reboot the DVR.

12.6.2 Update via an FTP server

1. Configure PC (running FTP server) and DVR in the same Local Area Network. Run

the 3rd-party TFTP software on the PC and copy the firmware into the root directory of

TFTP.

2. Enter the Firmware Update menu by clicking Menu > Maintenance > Upgrade.

3. Select the FTP tab, shown below.

4. Input the FTP server address.

5. Select Upgrade to begin update process.

6. After the system firmware has been updated, reboot the DVR.

Note: If the DVR fails to update, please contact your supplier/installer for further

assistance.

Intelligent Security and Fire Ltd