Instruction manual

83
12.5 Importing & Exporting Configuration
Configuration information from your DVR can be exported to a USB device and
imported into another DVR. This will allow you to efficiently setup the same
configuration on numerous DVRs.
To import or export DVR configuration:
1. Enter the Import/Export Configuration menu by clicking Menu > Maintenance >
Configuration.
2. Click Export to export a configuration file to USB device. USB device must be
connected at this point to the DVR.
3. To import a configuration file, select the file from the USB device and click the Import
button. After the import process is completed, you must reboot the DVR.
4. Click Cancel to exit out of menu.
12.6 Updating System Firmware
SPECIAL WARNING: DO NOT ATTEMPT ANY
FIRMWARE UPGRADE
WITHOUT SPECIFIC INSTRUCTIONS FROM YOUR SUPPLIER/INSTALLER. AN
INCORRECT UPGRADE CAN LEAVE THE DVR UNUSABLE.
The firmware on your DVR can be updated using two methods. These methods include
updating via an USB device or over the network via an FTP server.
12.6.1 Update via a USB device
1. Connect USB device to DVR. The firmware file must be located in the root directory
of your USB device.
2. Enter the Firmware Update menu by clicking Menu > Maintenance > Upgrade.
Intelligent Security and Fire Ltd