Instruction manual

7. Click on the Network Permission tab to configure network privileges, as shown

below.

The network settings include:

• Remote Log Search: Remotely view logs that are saved on the DVR.

• Remote Configuration: Remotely configure parameters, restore parameters to factory

defaults and import settings to as well as export settings from DVR.

• Remote Camera Management: Remotely enable and disable analogue channels. Add

and delete IP cameras.

• Remote Serial Port Control: Configure settings for RS232 and RS485 ports.

• Remote Video Output Control: Send remote button control signal.

• Two-Way Audio: Ability to use two-way audio between the remote client and the

DVR.

• Remote Alarm Control: Remote alert or control the relay output of the DVR. Alarm

and exception settings must be configured properly to upload to host.

• Remote Advanced Management: Remotely manage hard disk drives (initialising and

setting properties for HDDs). Ability to remotely update system firmware and cancel the

relay output

• Remote Shutdown/Reboot: Remotely shutdown or reboot the DVR.

8. Click on the Camera Permission tab to configure channel privileges, as shown below.

Intelligent Security and Fire Ltd