Instruction manual

80
2. Enter information for new user, including User Name, Password, Level and User’s
MAC address.
3. The Level is the user level and is separated into two tiers.
• Operator: The Operator user level has the authority to configure two-way audio in
network settings and all parameters in channel settings.
• Guest: The Guest user cannot configure network settings, but can configure the local
playback as well as the remote playing in channel settings.
4. If User’s MAC is configured and enabled, the user may only access the DVR from
that particular MAC address. Only set this if you want to access the DVR from one
network device only i.e PC, laptop etc.
5. Select the Permission button to enter the Privilege Settings menu, shown below.
6. Configure privileges for local settings under Local Permission tab. The local settings
include:
• Local Log Search: Search and view logs of DVR.
• Local Configuration: Configure and restore parameters to factory defaults. Introduce
settings to export settings from DVR.
• Local Camera Management: Enable and disable analogue channels. Ability to add
and delete IP cameras.
• Local Advanced Management: HDD management (including the initialisation and
changing the properties of a disk). Ability to update system firmware as well as to stop
the relay output.
• Local Shutdown/Reboot: Shutdown or reboot the DVR.
Intelligent Security and Fire Ltd