Instruction manual

12.2 Configuring Advanced Settings

To configure more advanced settings:

1. Enter the General Settings menu, shown above by clicking Menu > Settings > General.

2. Click the More Settings tab; this will take you to the More Settings menu, shown

below.

3. Configure settings, including:

• Device Name: Name to use for DVR.

• Device No.: Device number to use for DVR.

• CVBS Output Brightness: Video output brightness.

• Transparency: Menu transparency.

• Operation Timeout: Set timeout time for menu inactivity. For example, if timeout time

was set to 5 minutes, after 5 minutes of inactivity in the General Settings menu, you’ll be

returned to the Live Preview.

• Event Hint: If an exception occurs, will display a warning triangle in preview mode.

• Enable Output Hint: To display output status in preview mode - M (Main) or A (Aux).

• CVBS Scaling: Enable/disable video output scaling for main/aux video output.

12.3 Configuring RS-232 Port Settings (This option is not supported)

To configure RS-232 devices to be used with the DVR:

1. Enter the RS-232 Settings menu, shown in by clicking Menu > Settings > RS232.

Intelligent Security and Fire Ltd