Instruction manual

71
11. HDD Management
11.1 Initialising HDDs
A newly installed hard disk drive (HDD) must be first initialised before it can be used
with your DVR. Initialising the HDD will erase all data on it.
To initialise a HDD:
1. Enter the HDD Management menu by clicking Menu > HDD.
2. Select HDD to initialise.
3. Click the Init button.
4. Select OK button to begin initialisation. After the HDD has been initialised, the status
of the HDD will change from Abnormal to Normal.
11.2 Setting Network HDD
Add the allocated “DVR Storage Space” of NAS or IP SAN disk to DVR.
To set a network HDD:
1. Enter the HDD Management menu by clicking Menu > HDD.
Intelligent Security and Fire Ltd