Instruction manual

69
3. Select the Advanced tab to enter the Advanced Camera Settings menu shown below.
4. Check the Mask checkbox to enable feature.
5. Click the Area Settings button to enter Area Settings menu.
6. Setup mask area, as shown below. Up to 4 areas can be set.
7. Select OK to save and exit mask setup.
10.4 Adjusting Display Settings
Display settings such as the brightness, contrast, saturation and hue can also be adjusted
in the Camera Management menu.
To adjust display settings:
1. Enter the Camera Management/Settings menu by clicking Menu > Settings > Camera.
2. Select channel to adjust display settings under Channel number. Click the Set button.
Intelligent Security and Fire Ltd