Instruction manual

68
14. Select the Substream in the Encoding Parameters. Substream allows the setting of
resource settings for network preview only and does not affect mainstream settings that
are used for writing data to the hard drive.
15. Click OK to save and exit out of menu.
Note: The quality of resolution, frame rate and bit rate depends on the performance of the
IP camera.
10.2 Configuring OSD Settings
On Screen Display (OSD) settings can be configured in the Camera Management menu.
The OSD is shown in each display during Live Preview mode and includes the time and
date as well as the camera name.
To configure OSD settings:
1. Enter the Camera Management/Settings menu, shown below by clicking Menu >
Settings > Camera.
2. Select channel to setup OSD settings under Channel number. Click the Set button.
3. Configure desired OSD settings as shown below.
10.3 Setting up Privacy Mask
You may setup privacy mask, to mask off sensitive or private areas, in the field of view
of a camera.
To setup privacy mask:
1. Enter the Camera Management/Settings menu by clicking Menu > Settings > Camera.
2. Select channel to setup privacy mask under Channel number. Click the Set button.
Intelligent Security and Fire Ltd