Instruction manual

63
4. Click OK to return to Patrol Management menu and repeat steps 2-3 to
configure other key points.
5. After all key points have been configured, click OK to save and exit menu.
• Clear Patrol:
1. Select a valid Patrol Number.
2. Click the Clear button to delete patrol.
• Call Patrol:
1. Select a valid Patrol Number.
2. Click the Start button to call the patrol, select the stop button to stop the patrol,
as shown below.
9.3.4 Customising Patterns
Patterns can be setup by recording the movement of the PTZ.
To setup and use PTZ patterns:
1. Enter the PTZ Control interface, see (Understanding PTZ Controls) by clicking
PTZ in the mouse menu or the PTZ button on the front panel.
2. Select the Pattern button to enter the Pattern Management menu, shown below.
Intelligent Security and Fire Ltd