Instruction manual

58
8.1.8 Configuring Server and HTTP Ports
If you would like to change the server and HTTP ports from the default settings, you can
do so in the Network Settings menu. The default server port is 8000 while the default
HTTP port is 80.
To change the default ports:
1. Enter the Network Settings menu by clicking Menu > Setting > Network.
2. Select the Advanced tab.
3. Click the Set button next to Host/Others to enter the Host/Others menu.
4. Enter new Server Port and HTTP Port.
Note: The Server Port has a port range of 2000-65535 and is used for remote client
software access. The HTTP port and Server Port are used for remote Internet browser
access.
8.1.9 Configuring E-mail Settings
To configure E-mail settings:
1. Enter the Network Settings menu by clicking Menu > Setting > Network.
2. Select the Advanced tab.
3. Click the Set button next to E-mail to enter the E-mail menu.
Intelligent Security and Fire Ltd