Instruction manual

55
4. If you would like to configure your own settings, enter the settings for:
• IP Address: IP address you would like to use for your DVR.
• Subnet Mask: Subnet Mask of network.
• Default Gateway: IP address of your Gateway. Typically the local IP address of your
router.
• Preferred/Alternate DNS Server: The preferred and alternate Domain Name System
(DNS) Server to be used with your DVR.
5. Click OK to save and exit the Network Settings menu.
8.1.2 Configuring PPPoE Settings
Your DVR also allows for Point-to-Point Protocol over Ethernet (PPPoE) access.
However PPPoE is mainly available in the USA and not in the UK. PPPoA is used in
the UK but this is not supported by this product.
8.1.3 Configuring DDNS
You may setup Dynamic DNS (DDNS) if you do not have a static IP address for remote
connection.
To setup DDNS:
1. Enter the Network Settings menu by clicking Menu > Setting > Network.
2. Select the Advanced tab.
3. Select the Set button next to DDNS to enter the DDNS settings menu.
4. Check the DDNS checkbox to enable feature.
5. Select DDNS Type. There are three different DDNS type to choose from, IpServer,
PeanutHull and DynDNS.
• IpServer: Enter Server Address for IpServer.
• PeanutHull: Enter User Name and Password obtained from the PeanutHull
website
• DynDNS: Enter Server Address for DynDNS (i.e. members.dyndns.org)
Intelligent Security and Fire Ltd