Instruction manual

51
7.1.5 Detecting Video Tampering
Video tampering (i.e. moving camera to a different position) can also be detected and set
to trigger an action on your DVR. To setup video tempering detection:
1. Enter Camera Management/Settings menu by clicking Menu > Setting > Camera.
2. Select camera under Channel number to configure video loss detection and
click the Set button.
3. Select the Advanced tab.
4. Check the Tamper Detection checkbox, as shown below.
5. Click the Area Settings button to enter the area setup.
6. Setup tampering area, as shown below. Only one tampering area can be set, with the
full screen being the maximum area.
Intelligent Security and Fire Ltd