Instruction manual

49
3. Configure the settings for selected output.
4. Select OK to save and exit.
Note: If the Hold For option is selected as Manually Stop, the alarm will only stop
when you manually stop it (See Triggering Alarm Outputs Manually).
Triggering an IP camera will require the necessary permissions from the camera.
7.1.3 Triggering Alarm Outputs Manually
You may also trigger alarm outputs manually through the Manual Alarm menu.
To trigger alarm outputs manually:
1. Enter the Manual Alarm menu by clicking Menu > Manual Alarm.
2. In the Manual Alarm menu, you may:
• Trigger: Select an alarm from the list and click Trigger to trigger its output.
• Trigger All: Trigger all alarm outputs at once.
• Clear All: Stop all alarm outputs at once.
3. Select OK to return to the previous menu.
7.1.4 Detecting Video Loss
Your DVR can be setup to detect video loss and trigger an action. To setup video loss
detection:
1. Enter Camera Management/Settings menu by clicking Menu > Setting >
Camera.
Intelligent Security and Fire Ltd