Instruction manual

47
9. Select cameras to trigger for recording when motion is detected by checking the
checkboxes under the desired cameras.
10. Select Schedule tab to set arm time, 8 periods can be set.
11. Click OK to complete motion settings for the selected camera.
You may now add a schedule to start recording when motion is detected (See Scheduling
a Recording).
7.1.2 Setting up Sensor Alarms
Recordings can also be triggered from an external sensor alarm device. To setup sensor
alarms:
1. Enter into the Alarm Management menu shown below.
2. Select the Alarm Input number and click the Set button. This will open the Alarm
Input Setting menu, shown below.
3. Set the alarm input type. The options available are Normally Open (N.O.) and
Normally Closed (N.C.).
4. Check the checkbox next to Setting and click the Handle button to enter the Alarm
Input Handle menu.
5. Select the Triggered Camera tab.
6. Select cameras to trigger for recording when alarm occurs by checking the checkboxes
under the desired cameras, as shown below.
Intelligent Security and Fire Ltd