Instruction manual

46
4. Click the Area Settings button to enter the Motion Detection area and Sensitivity
configuration interface.
5. The Motion Detection area, shown below, allows you to mask areas where you would
like motion to be detected. The maximum area is the whole screen. You can left click
mouse, hold and drag it to mask the Motion Detection area. Using EDIT button and
direction buttons also help to select Motion Detection area.
6. Right click mouse or press MENU button on the front panel to set the Motion
Detection Sensitivity shown below. The higher the sensitivity value, the higher the
sensitivity. In order to configure a proper sensitivity for the surveillance area, you may
select Highlight On in the right-click menu, then all detected motion areas on the camera
will be marked with red highlight colour.
7. Click OK to return to the Camera Settings menu.
8. Click the Handle button to open the Exception Handle menu, shown below. Select
the Triggered Camera tab.
Intelligent Security and Fire Ltd