Instruction manual

45
7. Alarm Settings
7.1 Configuring Alarms
7.1.1 Setting up Motion Detection
Using motion detection recording will increase the number of days your DVR is able to
record. It will only record relevant events rather than recording everything, making
searching for an event much easier. To set up motion detection:
1. Enter Camera Management/Setting:
Enter the Camera Management interface, shown below by navigating to
Menu > Setting > Camera.
Select the channel to configure motion detection on and click Set.
2. Select the Advanced tab to open up the Advanced Camera Settings menu, shown
below.
3. Check the checkbox next to Motion Detection.
Intelligent Security and Fire Ltd