Instruction manual

43
2. Using the Clip Start/Stop button in the Playback Control Panel, select the
start and end of the video clip during playback.
3. Repeat for additional clips.
4. Click the Quit Playback button to exit from the Playback interface. You’ll
then be prompted to save the clips as shown below.
5. Click Yes to enter Backup interface or No to exit Playback interface.
6. At the Backup interface, select the Start button to begin the Backup process.
• Using the Front Panel / Remote:
1. Enter into the Playback interface (See Playing Back a Recording).
2. During playback, press the EDIT button to mark start of clip.
3. Press the EDIT button again to mark end of clip.
4. Repeat for additional clips.
5. Press the ESC button to exit from the Playback interface. You’ll then be
prompted to save the clips, as shown above.
6. Click the Yes button to enter Backup interface or select No to exit to
Playback interface.
7. At the Backup interface, select the Start button to begin the Backup process.
6.4 Exporting Files via e-SATA (optional facility)
The e-SATA port on the rear panel can backup the recorded files by using an external
SATA disk. To export recorded files via e-SATA:
1. Enter the Record Settings menu by clicking Menu > Settings > Record
2. Click Advanced tab, it will take you to the e-SATA property configuration, as
shown. Select For Export option in the drop-down list, the DVR will ask for reboot
to take effect.
Intelligent Security and Fire Ltd