Instruction manual

39
4. Before selecting Analyze to start analysis, you also can select full-screen
detection, configure the sensitivity level, etc.
5. You will go to playback interface with the result of smart search, which is
indicated by green line clips in the recording time line.
6. Right-click mouse after playback and you will find menu display shown below.
You can select Dynamic Analysis to re-drag the analysis area and to re-analyse it; on the
other hand, you can select Previous Dynamic to go to the previous event clip or Next
Dynamic to go to the next event clip.
5.8 Using Digital Zoom
To use digital zoom in Playback mode:
1. Enter Digital Zoom mode by right-clicking with the mouse in Playback and
selecting Zoom.
2. Left-Click and drag red box for desired magnification area, as shown below.
The selected area will be zoomed to full screen.
Intelligent Security and Fire Ltd