Instruction manual

33
4. Click the Set button. This will take you to the HDD Settings menu.
5. Set HDD Status to Redundancy. Verify at least one other HDD is set to R/W
(read/write).
6. Click the OK button to save settings and return to the previous menu.
7. Navigate to the Record Settings menu by clicking Menu > Setting > Record
Setting.
8. Click on the General tab.
9. Select the Camera to be used for redundancy.
10. Next to More Settings, click on the Set button. This will bring up additional
settings for the selected camera as below.
11. Set Redundantly Record to Yes.
12. Click the OK button to save
settings.
13. Repeat steps 8-12 for other cameras you
would like to redundantly record.
Intelligent Security and Fire Ltd