Instruction manual

Note 3: When a VGA display is connected to the DVR, the VGA monitor will become

the main output. All the Live Preview operations will be available. Main video (VIDEO

OUT) is set as Aux control output, which supports PTZ Control, Playback, and Preview

mode on it. Aux video (VIDEO SPOT OUT) only allows Preview depending on

configuration. The main audio (AUDIO OUT) is tied to the main video (VIDEO OUT),

while Aux audio (AUDIO SPOT OUT) is tied to the VGA video output.

Note 4: When neither the HDMI or VGA monitor is not connected to the DVR, all the

Live Preview operations will then become available to the main video output. The

VIDEO SPOT OUT will be the Aux control output. Main audio will still be tied to main

video while Aux audio will be tied to Aux CVBS video (VIDEO SPOT OUT).

Note 5: When the resolution of video output is set as the highest one, the intelligent and

zero channel encoding features will be not be available anymore.

3.3.1 Setting Camera Order

Setting the camera order allows you to logically position cameras for more efficient

monitoring in your own individual location.

To set the camera order:

1. Enter the Display Settings menu (Menu > Setting > Display).

2. Click the Set button.

3. Select the display Mode i.e 4 x 4, 3 x 3, 2 x 2 or 1 x 1 for camera order.

4. Using the up and down button at each display, select the camera you would

like to set. Setting an ‘X’ will mean the camera will not be displayed.

5. Click the OK button.

Intelligent Security and Fire Ltd