Instruction manual

3.3 Configuring Live Preview Displays

Live Preview displays can be customized to your own needs. These settings can be

accessed by entering the Display Settings menu.

To access the Display Settings menu:

1. Click the MENU button.

2. Click the Setting icon.

3. Click the Display icon.

4. Select Display Tab.

The settings available in this menu include:

• Video Output: Designates the output to configure the settings for. Outputs

include VGA, Main and Aux composite video (CVBS).

• Mode: Designates the display mode to be use for Live Preview.

• Dwell Time: The time in seconds to dwell between switching of channels

when Start Sequence is selected in Live Preview.

• Camera Order: The order of the cameras to be used in the selected display

mode (See Setting Camera Order).

• Enable Audio Output: Enables/disable audio output for the selected video

output.

• Event Output: Designates the output to show event video on.

• Event Dwell Time: The time in seconds to show event screen.

Note 1: This DVR will automatically detect if an HDMI monitor or VGA monitor is

connected. Only HDMI monitor can be activated if both HDMI and VGA ports are

connected.

Note 2: When an HDMI display is connected to the DVR, it will become the main

output. All the Live Preview operations will be available. Main video (VIDEO OUT) is

set as Aux control output, which supports PTZ Control, Playback, and Preview mode on

it. The main audio (AUDIO OUT) is tied to the main video (VIDEO OUT), while Aux

audio (AUDIO SPOT OUT) is tied to the HDMI video output.

Intelligent Security and Fire Ltd