Instruction manual

18
2. Enter the administrator’s username and password in the dialogue box for
authentication.
3. Click the Yes button.
Note: Do not press the POWER button again when the system is shutting down.
2.2 Rebooting and Locking Your DVR
While in the Shutdown menu (see 2.1 diagram), you may also reboot or lock your DVR.
Locking your DVR will return you to the Live Preview mode, which will require a user
name and password to exit out of it. The Reboot button will reboot your DVR.
To reboot or lock your DVR:
1. Enter the Shutdown menu by clicking Menu > Shutdown.
2. Select the Lock button to lock the DVR or the Reboot button to reboot the DVR.
2.3 Using the Setup Wizard
By default, the Setup Wizard will start once the DVR has loaded, as shown in Figure 2.
The Setup Wizard will walk you through some of the more important settings of your
DVR. If you do not wish to use the Setup Wizard at this time, click the Cancel button.
You may also choose to use the Setup Wizard at a later time by leaving the “Start
Wizard when DVR starts?” checkbox checked.
To start using the Setup Wizard:
1. Click the Next button on the Wizard window. This will take you to the User
Permission window, shown below.
Intelligent Security and Fire Ltd