Instruction manual

7. DIRECTION/ENTER Buttons:

• DIRECTION Buttons: The DIRECTION buttons are used to navigate between

different fields and items in menus. In Playback mode, the Up and Down button is

used to speed up and slow down recorded video. The Left and Right button will

select the next and previous day of recordings. In Preview mode, these buttons

can be used to cycle through channels.

• ENTER Button: The ENTER button is used to confirm selection in any of the

menu modes. It can also be used to tick checkbox fields. In Playback mode, it can

be used to play or pause the video. In Single Play mode, pressing the ENTER

button will advance the video by a single frame.

8. JOG SHUTTLE Control: The JOG SHUTTLE control can be used to move the

active selection in a menu. The inner ring will move the selection up and down; the outer

ring will move it left and right. In the Playback mode, the inner ring is used to jump 30

seconds forward/backward in a video. The inner ring can be used to speed up/slow down

the video. The outer ring can be used to speed up/slow down the video. In Preview mode,

it can be used to cycle through different channels.

Note: If GUARD indicator is blue (default), all alarm event and exception settings are

valid. Otherwise, alarm event and exception settings will be invalid, but normal recording

will still be available. It is important to note that you must click the EDIT button on either

the remote or front panel in a text field before you’re able to edit its content. After

entering text, you must hit the ENTER button to be able to move on to the next field.

Intelligent Security and Fire Ltd