Instruction manual

10
1.3 Operating your DVR
There are various methods for controlling your DVR including using the front panel
controls, the infra-red remote, soft keyboard or the mouse.
The controls on the front panel include:
1. Power Button: Powers DVR on/off.
2. IR Receiver: Receiver for IR remote.
3. USB Ports: Universal Serial Bus (USB) ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
4. Status Indicators: Status indicators for different features on the DVR.
• Alarm: Alarm indicator turns red when a sensor alarm is detected.
• Ready: Ready indicator turns blue when DVR is functioning properly.
• Status: Status indicator turns blue when DVR is controlled by an IR remote.
Indicator turns red when controlled by a keyboard and purple when IR remote and
keyboard are used at the same time.
• HDD: HDD indicator blinks red when data is being read from or written to
HDD.
• Modem: Reserved
• TX/RX: TX/RX indictor blinks blue when network connection is functioning
properly.
• Guard: Guard indicator turns blue when the device is armed, off when the
device is unarmed. The arm/disarm state can be initiated by pressing and holding
on the ESC button for more than 3 seconds in Preview mode.
1
2
3
4
5
6
7
8
Intelligent Security and Fire Ltd