Setup Guide

Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximum de 6 dBiL. L’impédance
d'antenne requise est de 50 ohms. Pour réduire les interférences radio potentielles pour les autres utilisateurs, le type
d'antenne et son gain doivent être choisis afin que la puissance isotrope équivalente (PIRE ) ne soit pas supérieure à
celle requise pour une bonne communication. Les antennes du lecteur devraient être positionnés de telle sorte que le
personnel opérant dans la region d’émission pendant des périodes prolongées peuvent rester en toute sécurité à au
moins 34 cm de la surface de l'antenne dans un environnement non contrôlé.
Legal Notices Continued
European Radio Compliance.
This Equipment has been tested and found compliant with the following Mandatory Specifications:
EN 302 208
Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and
in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU.
EN 301 489
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Harmonised Standard covering the
essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive
2014/30/EU:
Part 1: Common technical requirements
Part 3: Specific conditions for short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz.
EN 62311:2008 Caution
Reader antennas should be positioned so that personnel in the area for prolonged periods may safely remain at least
25.5 cm, in an uncontrolled environment from the antenna’s surface. This is in accordance with EN50364 European
safety standards for Human exposure and exposure level radiation limits imposed by The Commission for Non-
Ionizing Radiation. ICNIRP
EN60950 / UL 60950 / IEC 60950
Safety of information technology equipment.
This radio must be used with the external mains to DC power adaptor powered by the UL and/or TUV Listed and IEC Certified
LPS or Class 2 external power supply rated: POE Output 56V/0.55A, 48V/0.4A or DC 12V/2.5A, supplied with the product.
IFT (Mexico)
Numero: PCPALAL-16 0356